-40%
Hobbywing 38010201 Max10 Sct Esc Combo W/ 3660sl 4000kv brushless Motor
$ 73.38
- Description
- Size Guide
Description
HOBBYWING EZRUN Max10 SCT ESC / 3660 SL Brushless 4000KV G2 Motor NEW. Authorized Dealer.BRAND NEW
What's in the box?
1 x Ezrun Max10 SCT ESC
1 x Ezrun 3660 SL brushless motor
Supportive accessories (double side tape, etc)
Motor Features:
- Innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners.
- Built-in temperature sensor and sensor port protect the motor from damage due to overheat when pairing EZRUN 3660 G2 with a EZRUN MAX10 SCT ESC.
- O-ring seal fitted between the front end bell and motor case isolates screw holes from inner parts to prevent liquid or dust from getting inside and protect motor from damage.
- Special design implemented by the motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws.
- Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%).
- CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness.
- Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency.
- Excellent match between EZRUN 3660 G2 with EZRUN MAX10 SCT guarantees users large torque plus a very smooth and linear power band.
ESC Features:
- ESC is compatible with both sensorless and sensored brushless motors (only in sensorless mode).
- Fully waterproof design for all conditions.
- Super internal switch-mode BEC with switchable voltage of 6V/7.4V for usage with high torque and high voltage servos.
- Motor Thermal Protection: It will be available after you plug the temperature monitoring cable on the ESC into the temperature monitoring port (marked with “TEMP”) at the bottom of the matching HOBBYWING motor.
- Highly reliable electronic switch design prevent mechanical switch failure due to dirt, water, dust and etc.
- Separate programming port to easily connect the LED program card or the LCD program box to the ESC.
- Proportional brake with 9 levels of maximum brake force and drag brake force.
- 5 levels of acceleration/punch from soft to aggressive for different vehicles, tires and tracks.
- Capacitor Protection:Innovative Capacitor Protection effectively protects capacitors from exploding and causing irreversible damage to the ESC from overloading. • Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection, overload protection, and fail safe (throttle signal loss protection). • Single-button ESC programming and factory reset.
- Advanced programming via portable LED program card, multifunction LCD program box or WiFi module.
- Firmware upgrade via HOBBYWING multifunction LCD program box or WiFi module (item sold separately).
Motor Specs:
LiPo: 2-3S
R. (Ω): 0.0060
No-load Current: 5.7A
Motor Diameter & Length: Φ=36 / L=60
Shaft Diameter & Length: Φ=5 / L=18.5
Pole: 4
Weight (g): 268
ESC Specs:
Scale Vehicles: 1/10th
Cont./Peak Current: 120A/830A
Motor Mode: Sensorless
Input: 6-12 Cells NiMH or 2-4S Lipo
Motor Limit: 2S LiPo:KV≤6000; 3S LiPo:KV≤4000; 4S LiPo:KV≤3000 (3656 Series of Motors)
BEC Output: 6V/7.4V Switchable, Continuous Current of 4A (Switch-mode)
Programming Port: FAN/PRG Port
ESC Programming: Via the SET button/LED Program card /LCD Program Box/ WiFi Modul
Switch Mode: Electronic Switch
Capacitor Protection: Yes
Waterproof: Yes
Size (L.W.H)mm: 49.0/39.5/34.7
Weight (g): 105g
No returns unless still sealed, any support is through manufacturer.