-40%

Safety Siren Pro Series Digital 3 Radon Detector Monitor + Batteries WARRANTY

$ 508.44

Availability: 132 in stock
  • Item must be returned within: 14 Days
  • Condition: New
  • All returns accepted: Returns Accepted
  • Brand: Safety Siren
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Type: Radon Detector

    Description

    How to Test
    The detector measures radon gas in the air you breathe. You do not want to measure the chemical composition of objects in your home with this device. Remember, the air you breathe is the most important aspect of measuring and monitoring radon gas.
    The detector should be placed in the lowest living area of the home in a location where it will not be disturbed. The audible alarm should be able to be heard from areas frequented on a daily basis. A second detector placed in a basement room rarely used, is also a good placement to determine the level of radon in the home.
    The location of the detector should be at least 3 feet away from windows, doors, or any other potential openings in the exterior walls. The location of the detector should be at least 1 foot from the exterior wall and at least 20 inches from the floor. No other object should be placed within 4 inches of the detector. After taking air samples for approximately 48 hours, the initial reading will display on the screen.
    Here are some suggestions on where not to place your pro series 3 for optimal results:
    Recommend not to place -
    ·
    near televisions, desktop or laptop computers, radios, or other types electrical devices
    ·
    near excessive heat, woodstoves, fireplaces, direct sunlight, spas and areas of high
    humidity
    ·
    near furniture, curtains, or other items that may inhibit air flow through the ventilation slots of the detector
    ·
    near drafts caused by heating, ventilating, air condition vents, doors, fans and windows
    ·
    in kitchens, laundry rooms, closets or bathrooms.
    ·
    directly on metal, granite or slate
    Here are the specs:
    ·
    Power Source Adapter: 120V AC, 60 Hz, 6.5 W
    ·
    Input for Gas Detector: 18V DC 200mA
    ·
    Sensor Voltage: 250VDC
    ·
    Sensor: Ionization Chamber
    ·
    Full Scale Reading: 0.0 to 999.99 pCi/L
    ·
    Operating Environment: 32 Degrees F (0 Degrees C) to 104 Degrees (40 Degrees C)
    ·
    Storage Environment: -4 Degrees F (-20 Degrees C) to 185 Degrees (85 Degrees C)
    ·
    Audible Alarm: 85dB at 10cm - Beeps every hour if readings reach 4 pCi/L or greater. It takes at least 48 hours to get an initial reading. Alarm may be muted by user.
    ·
    Dimensions: 4.7" x 3.1" x 2.1"
    Manufacturers Warranty: 1 Year